High-Speed Vision for Industrial Robotics
0.5MP global shutter MIPI module built for robotic arms, grippers, and end-effector integration.
High-Speed Vision for Industrial Robotics
0.5MP global shutter MIPI module built for robotic arms, grippers, and end-effector integration.
High-Speed Vision for Industrial Robotics
0.5MP global shutter MIPI module built for robotic arms, grippers, and end-effector integration.
Robotic arms moving at production speed turn standard rolling-shutter cameras into a problem — every banking gripper, every fast cycle smears the frame and breaks the vision loop. The AE-CCM-GS-MIRA050-M-80 captures the entire frame at one instant with a true global shutter, runs 120 fps under NIR illumination, and fits inside a 5×5 mm footprint at the end-effector itself.
0.5MP Monochrome Global Shutter MIPI Camera Module
Built around the AMS-OSRAM MIRA050 sensor, delivering 0.5 MP at 120 fps through a true global shutter and an 80° wide-angle fixed-focus lens — engineered for closed-loop machine vision on moving robotic systems. NIR-enhanced BSI pixels stay sensitive under 850 nm and 940 nm illumination, and the 5×5 mm form factor fits inside grippers, fingertip sensors, and tight end-effector cavities.
AE-CCM-GS-MIRA050-M-80
Sensor
Resolution
600 × 800 px · 2.79 µm pixel pitch
Field of View
93° diagonal · F/2.4 fixed-focus lens
Frame Rate
SHUTTER
Interface
DIMENSIONS
Fits inside grippers, fingertip sensors, end-effectors
Prototype to Payload-Ready in Eigth Weeks.
01
Specification sign-off
Module configuration, lens FOV, flex PCB length, and connector pinout locked at sign-off. No moving targets once production began.
02
End-effector integration
Modules supplied tuned to each robotic platform, with NIR illumination sync trigger validated against the customer’s vision pipeline.
03
Distribution
Distributed for qualified, repeatable supply at mass production volume.